Syracuse Foundation Pros logoSyracuse Foundation ProsFoundation Repair · Syracuse, UT
Menu
patio lifting in Syracuse, UT

Syracuse Foundation Pros

Patio Lifting in Syracuse, UT

Patio Lifting in Syracuse, UT: polyjacking foam lifts sunken slabs level through dime-sized holes. Free estimates, same-day results.

Serving Syracuse and nearby communities.

A settled patio slab is almost always a void problem, not a concrete problem. Soil under the slab compacts or washes out over a wet season, the concrete drops into the gap, and you end up with a trip edge or a low spot that collects water against the house. Syracuse Foundation Pros fixes this with polyjacking: hydrophobic polyurethane foam injected through dime-sized drill holes, filling the void and lifting the slab back to grade without tearing anything out.

This works on the clay and sandy soil mix common on Syracuse's benchland, where seasonal moisture swings are what create the void in the first place. Most patios go from sunken to level in a few hours, with the patio usable again the same day.

What's included

What's included with Patio Lifting

  • Typically included — void assessment, drill access points, foam injection and lift, hole patching, surface check for level.
  • Optional — joint re-sealing on adjacent expansion joints, minor regrading at the slab edge for drainage.
  • Customer prep — clear furniture, planters, and grills off the affected slab before the crew arrives.

How it works

How our Patio Lifting process works

  1. Patio Assessment photo
    Step 1

    Patio Assessment

    Uneven or settled patio sections are identified and measured for lift depth.

  2. Access Point Drilling photo
    Step 2

    Access Point Drilling

    Small holes are made at key points across the patio surface.

  3. Foam Injection photo
    Step 3

    Foam Injection

    Expanding material is injected to raise the settled sections evenly.

  4. Level Verification photo
    Step 4

    Level Verification

    Elevation is checked throughout the lifting process for accuracy.

  5. Hole Patching photo
    Step 5

    Hole Patching

    Access points are filled and smoothed to match the patio surface.

  6. Final Walkthrough photo
    Step 6

    Final Walkthrough

    The patio is inspected to confirm a level, stable finish.

Materials

Materials and methods for Patio Lifting

Patio lifting uses lightweight fill materials matched to how Syracuse's soil holds moisture through the seasons.

  • Polyurethane Foam photo

    Polyurethane Foam

    Lifts patio slabs with minimal disruption to surrounding landscaping and cures fast enough to walk on the same day.

  • Patch Compound photo

    Patch Compound

    Fills and finishes drilled access holes smoothly so the repair isn't visible once cured.

  • Joint Filler photo

    Joint Filler

    Restores expansion joints disturbed by the lifting process, keeping water from re-pooling at the seam.

  • Surface Sealant photo

    Surface Sealant

    Guards the patio against moisture and surface wear through Syracuse's freeze-thaw winters.

  • Leveling Tools photo

    Leveling Tools

    Used to verify consistent elevation across the patio before the crew leaves.

  • Bonding Agent photo

    Bonding Agent

    Enhances adhesion between patch material and existing concrete for a durable seam.

Timeline

How long does patio lifting take?

Most patio lifting jobs wrap up in a single visit. Here's how it typically goes: <!-- rover-autofix-links -->

  1. 01

    Consult and assessment

    same day
  2. 02

    Foam injection and lift

    1–3 hours

    depending on slab size and number of low spots.

  3. 03

    Hole patching and finish

    same visit, immediately after lift.

  4. 04

    Walk/use ready

    within a few hours of foam curing.

  5. 05

    [Home](/)

  6. 06

    [Contact](/contact)

Need a schedule that fits?

Get a Free Estimate

Next step

Get a Patio Lifting estimate in Syracuse

Sunken patio slab? Call Syracuse Foundation Pros at (435) 572-2142 for a free estimate, or request one online. Most jobs are quoted on-site the same day.

FAQs

Patio Lifting FAQs

How much does patio lifting cost in Syracuse?

Pricing depends on slab size, how many sections are sunken, and how deep the void is. Most jobs run a few hundred to a couple thousand dollars. A free on-site estimate gives you an exact number.

How long does patio lifting take?

Most patios are lifted and patched in a single visit, usually a few hours. The patio is typically usable again the same day once the foam sets.

Do I need a permit for patio lifting?

Standard patio lifting doesn't usually require a permit since it's leveling existing concrete, not adding structure. If your patio has an attached cover or roof structure, check with Davis County first.

Is DIY patio lifting a good idea?

Topping a sunken patio with self-leveling compound doesn't address the void underneath, so the same spot usually sinks again. Foam injection actually fills the space causing the problem.

What's the difference between polyjacking and mudjacking for a patio?

Polyurethane foam is lighter, cures faster, and doesn't add extra weight to soil that's already settling. Mudjacking uses a heavier slurry that can make a soft-soil problem worse over time.

When should I call about a sunken patio?

Call when you notice a trip edge at a joint, water pooling on one section after rain, or furniture rocking because the slab isn't level anymore.

Before & after

Before and after Patio Lifting results

  • patio lifting in Syracuse, UT
    Before
  • patio lifting in Syracuse, UT
    After

Ask about Patio Lifting

Tell us about the project and how to reach you.

Call (435) 572-2142